Home - Products & Solutions for Enterprises - CCTV. Smart House - Smart Sensors - Ajax - MotionProtect black EU

Ajax MotionProtect black EU

SKU: 5314.09.BL1

Description Additional

Download

Technical characteristics Ajax MotionProtect black EU:

Main features

Full list of features

Type	motion sensor
Application	indoor only
Radio protocol	Jeweller
Temperature measurement range	-10 °C -+40
Power supply	battery /типу CR123A 3 В
Recommended mounting height	2.4 m

Key Features

Type	motion sensor
Application	indoor only
Radio protocol	Jeweller
Temperature measurement range	-10 °C -+40
Horizontal angle of motion detection	88.5 °
Alarm response times on default settings	0.15 sec
Motion detection range	12 m
Vertical angle of motion detection	80°

Additional information

Power supply	battery /типу CR123A 3 В
Operating humidity	up to 75%
Operating temperature	0 °C - +50°С
Radio signal power	20 mW
Additional information	wireless connection
	viewing angles /88.5°/80°
	option to ignore animals /вага до 20 кг, зріст до
	protection against unauthorized opening of the case /тампер
Package Contents	detector
	SmartBracket mounting panel
	mounting kit
	CR123A battery
	manual

Physical

Recommended mounting height	2.4 m
Dimensions	110 × 65 × 50 mm
Colour	black
Weight	86 g

Warranty

24 months

Wireless motion detector that notifies the owner of the first signs of home or office intrusion. The detector is fastened to the wall in front of the doors and other places likely of intruder entry.

100 AZN*

out of stock

* Recommended retail price

Description of Ajax MotionProtect black EU

Principle of operation

The device detects human presence by IR level using a passive IR sensor. The data received is digitally processed in order to prevent false alarms.

Features

The device automatically increases or decreases the sensor sensitivity in order to accurately detect motion during hot and cold weather.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Features of the Ajax MotionProtect detector

The sensor is installed without damaging the interior.
Ajax MotionProtect wireless motion detectors use the Smart Detect software algorithm, which, when motion is detected, analyzes the waveform of the infrared sensor and compares it with the values typical for the movement of people.
The sensor does not raise the alarm because of the little animal’s. They have too small heatspot.
The “always active” mode is used in rooms requiring round-the-clock monitoring. The user will be notified of a traffic violation, regardless of whether the system is armed or not.
The Ajax MotionProtect radio motion detector allows you to test essential parameters. For example, signal strength test, detection area test and signal fading test. This test enables the sensor to be installed in a location with the best signal strength.
The sensor regularly transmits test signals to the central unit, and the polling period of the sensors can be adjusted at the user’s discretion. If the sensor is attempted to be stolen or broken, the central security system will immediately know about it and issue an alarm. To reliably monitor the operation of the alarm, the sensor regularly transmits a signal about the discharge of its battery to the central unit. The user will be promptly notified of the need to replace the battery in the sensor.
The information transmitted by the sensor is protected from interception and substitution attempts. The sensor case is protected against opening by a tamper.
The maximum distance between the sensor and the central unit is 2000 m in line of a sight.
The sensor detects movement at a distance of up to 12 m. The horizontal viewing angle is 88.5°.
The sensor does not respond to accidental movements of inanimate objects.
The sensitivity of the sensor is adjustable. You can choose the optimal value based on the pet’s size.
Depending on the distance to the central unit, the adaptive transmission power control allows less battery power consumption.
Digital temperature compensation ensures high sensitivity of the sensor even in rooms where the temperature is close to the human body.
Thanks to a special energy-saving algorithm, the sensor operates on a CR123A battery for up to 7 years.
The sensor works with the Ajax ocBridge wireless signal receiver.

Read full review ›

Images of Ajax MotionProtect black EU

Products catalog

Azə

Products catalog

Back

By Category By Vendor