Type | motion sensor |
Application | indoor only |
Compatibility | Ajax Hub |
Ajax Hub Plus | |
Ajax Hub 2 | |
Ajax ReX | |
Ajax Hub 2 Plus | |
Hub Hybrid | |
Ajax ReX 2 | |
ocBridge Plus | |
uartBridge | |
Radio protocol | Jeweller |
Radio frequency | 868,0−868,6 MHz |
868,7−869,2 MHz | |
866,0 – 866,5 МHz | |
905,0 – 926,5 МHz | |
915,85 – 926,5 МHz | |
921,0 – 922,0 МHz | |
Power supply | battery /(CR123A, 3 В) |
Recommended mounting height | 2.4 m |
Type | motion sensor |
Application | indoor only |
Compatibility | Ajax Hub |
Ajax Hub Plus | |
Ajax Hub 2 | |
Ajax ReX | |
Ajax Hub 2 Plus | |
Hub Hybrid | |
Ajax ReX 2 | |
ocBridge Plus | |
uartBridge | |
Radio protocol | Jeweller |
Radio frequency | 868,0−868,6 MHz |
868,7−869,2 MHz | |
866,0 – 866,5 МHz | |
905,0 – 926,5 МHz | |
915,85 – 926,5 МHz | |
921,0 – 922,0 МHz | |
Horizontal angle of motion detection | 88.5 ° |
Alarm response times on default settings | 0.15 sec |
Pet immunity to | 50 cm |
Motion detection range | 12 m |
Wireless transmission range | 1200 m (зв’язок із централлю на відкритому просторі) |
Vertical angle of motion detection | 80° |
Power supply | battery /(CR123A, 3 В) |
Sensitive element | microwave sensor /(24 ГГц) |
Infrared sensor | |
temperature sensor | |
Operating humidity | up to 75% |
Operating temperature | −10 °C до +40°С |
Radio signal power | 20 mW |
Additional information | substitution protection |
remote setup via app | |
jamming message | |
opening and tearing tamper | |
Package Contents | motion sensor /(MotionProtect Plus) |
SmartBracket mounting panel | |
mounting kit | |
manual | |
CR123A power supply /(попередньо встановлений) |
Recommended mounting height | 2.4 m |
Dimensions | 110 × 65 × 50 mm |
Colour | black |
Weight | 96 g |
Warranty | 24 months |
Principle of operation
Detects human presence by temperature difference with background thermal radiation. The microwave sensor prevents false alarms caused by complex interference.
Designed for operation in rooms with fireplaces and air conditioners. Detects and ignores draughts, movement of curtains and blinds, and light flickering, glare and reflections.
Installation and set up
Ready to operate straight out the box. The battery is already installed inside, therefore there is no need to disassemble the detector. It can be mounted in just a few minutes using the SmartBracket mount.