Type | motion sensor |
Application | external use |
against break-in | |
Compatibility | Ajax Hub 2 |
Ajax Hub 2 Plus | |
Radio frequency | 868 MHz |
Power supply | batteries /4 x CR123A |
Recommended mounting height | 0.8 m (0.8–1.3 м від землі) |
Type | motion sensor |
Application | external use |
against break-in | |
Compatibility | Ajax Hub 2 |
Ajax Hub 2 Plus | |
Radio frequency | 868 MHz |
Sensor type | Infrared |
Type of installation | wall mount |
outdoor installation (laid on) | |
Horizontal angle of motion detection | 90 ° (датчик) |
Alarm response times on default settings | 0.15 sec |
Wireless transmission range | 1700 m |
Vertical angle of motion detection | 80° /(датчик) |
Photo resolution | 640 × 352 pix. (320 × 176 пікселів за замовчуванням) |
Number of photos in case of alarm | up to 5 with one alarm |
Power supply | batteries /4 x CR123A |
Operating humidity | up to 95% |
Operating temperature | –25°С до +60 °C |
Radio signal power | 20 mW |
Package Contents | motion sensor |
SmartBracket mounting panel | |
mounting kit | |
1 installation instruction | |
батарейка CR123A |
Recommended mounting height | 0.8 m (0.8–1.3 м від землі) |
Dimensions | 206 х 108 х 93 mm |
Colour | white |
Weight | 470 g |
Wireless outdoor motion detector with a photo camera to verify alarms
MotionCam Outdoor recognizes intrusion from the very first steps on the territory and confirms it with an animated series of photos. Visual verification helps to instantly ascertain the situation, saving users from concerns, and security companies from unnecessary patrol dispatches.
MotionCam Outdoor PhOD
MotionCam Outdoor is also available with Photo on Demand feature. Such detectors take photos when they detect an intrusion, as well as at the user’s request in the Ajax app
Don't miss a thing
Combining the best optics, fast processor and advanced software algorithms, MotionCam Outdoor takes informative pictures in any weather, day or night.
Intelligent false alarm filter
MotionCam Outdoor is equipped with two independent PIR sensors, the signals of which are analyzed by a two-step LISA algorithm. When both sensors detect motion, LISA performs correlation and spectral analysis of the signals, which helps to instantly distinguish real threats from interferences.
Correlation analysis
Whenever MotionСamOutdoor detects motion, LISA analyses and compares signal forms from two sensors in real-time. If forms are similar, the alarm is activated.
Spectral analysis
When both sensors detect motion, but the correlational analysis doesn’t identify enough similarities, LISA compares frequency components in the signals of both sensors.
Multilevel anti-sabotage protection
MotionCam Outdoor can not be unnoticeably disabled even if the system is disarmed. The detector is equipped with masking sensors that react to hindering, covering and painting the lens.
It will take the hub less than a minute1 to detect the loss of communication with the detector and inform a central monitoring station and users about the problem. The fact that MotionCam Outdoor was dismantled will become known instantly.
Effective security in any weather
MotionCam Outdoor resists the heat up to +60°С and withstand the cold down to −25°С. And to protect the sensors of the anti-masking system from rain and snow, we included a special hood.
Uncompromising communication reliability
MotionCam Outdoor uses two secure radio protocols simultaneously: Jeweler and Wings. Radio protocols work independently of each other and each is focused on its own function. Jeweler transmits alarms in 0.15 seconds, and thanks to Wings, the first shot from the site will be in the app in less than 9 seconds.
The radio signal range is sufficient to install the detector where it will be most effective. And up to 3 years of battery life minimizes maintenance efforts.
Less manual labor. More settings in the app
The process of connecting and configuring MotionCam Outdoor saves installation engineers time in the best possible way. To add a detector to the system, all you have to do is scan the QR code with the Ajax app, assign a name and a room to it. Configure the device in the app in real time,test detection zones and communication. If necessary, the detector can be disabled or its system parameters can be reconfigured remotely, without visiting the site.
Professional installation
Qualified engineers guarantee the quality installation of devices and disclosure of all the features of your security system. Contact a certified Ajax partner for help.